MeeGo 1.2 Harmattan Developer Documentation Develop for the Nokia N9

window.cpp Example File

widgets/spinboxes/window.cpp 
 /****************************************************************************
 **
 ** Copyright (C) 2011 Nokia Corporation and/or its subsidiary(-ies).
 ** All rights reserved.
 ** Contact: Nokia Corporation (qt-info@nokia.com)
 **
 ** This file is part of the examples of the Qt Toolkit.
 **
 ** $QT_BEGIN_LICENSE:BSD$
 ** You may use this file under the terms of the BSD license as follows:
 **
 ** "Redistribution and use in source and binary forms, with or without
 ** modification, are permitted provided that the following conditions are
 ** met:
 **   * Redistributions of source code must retain the above copyright
 **     notice, this list of conditions and the following disclaimer.
 **   * Redistributions in binary form must reproduce the above copyright
 **     notice, this list of conditions and the following disclaimer in
 **     the documentation and/or other materials provided with the
 **     distribution.
 **   * Neither the name of Nokia Corporation and its Subsidiary(-ies) nor
 **     the names of its contributors may be used to endorse or promote
 **     products derived from this software without specific prior written
 **     permission.
 **
 ** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 ** "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 ** LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 ** A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 ** OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 ** SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 ** LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 ** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 ** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 ** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 ** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE."
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/

 #include <QtGui>

 #include "window.h"

 Window::Window()
 {
     createSpinBoxes();
     createDateTimeEdits();
     createDoubleSpinBoxes();

     QHBoxLayout *layout = new QHBoxLayout;
     layout->addWidget(spinBoxesGroup);
     layout->addWidget(editsGroup);
     layout->addWidget(doubleSpinBoxesGroup);
     setLayout(layout);

     setWindowTitle(tr("Spin Boxes"));
 }

 void Window::createSpinBoxes()
 {
     spinBoxesGroup = new QGroupBox(tr("Spinboxes"));

     QLabel *integerLabel = new QLabel(tr("Enter a value between "
         "%1 and %2:").arg(-20).arg(20));
     QSpinBox *integerSpinBox = new QSpinBox;
     integerSpinBox->setRange(-20, 20);
     integerSpinBox->setSingleStep(1);
     integerSpinBox->setValue(0);

     QLabel *zoomLabel = new QLabel(tr("Enter a zoom value between "
         "%1 and %2:").arg(0).arg(1000));
     QSpinBox *zoomSpinBox = new QSpinBox;
     zoomSpinBox->setRange(0, 1000);
     zoomSpinBox->setSingleStep(10);
     zoomSpinBox->setSuffix("%");
     zoomSpinBox->setSpecialValueText(tr("Automatic"));
     zoomSpinBox->setValue(100);

     QLabel *priceLabel = new QLabel(tr("Enter a price between "
         "%1 and %2:").arg(0).arg(999));
     QSpinBox *priceSpinBox = new QSpinBox;
     priceSpinBox->setRange(0, 999);
     priceSpinBox->setSingleStep(1);
     priceSpinBox->setPrefix("$");
     priceSpinBox->setValue(99);

     QVBoxLayout *spinBoxLayout = new QVBoxLayout;
     spinBoxLayout->addWidget(integerLabel);
     spinBoxLayout->addWidget(integerSpinBox);
     spinBoxLayout->addWidget(zoomLabel);
     spinBoxLayout->addWidget(zoomSpinBox);
     spinBoxLayout->addWidget(priceLabel);
     spinBoxLayout->addWidget(priceSpinBox);
     spinBoxesGroup->setLayout(spinBoxLayout);
 }

 void Window::createDateTimeEdits()
 {
     editsGroup = new QGroupBox(tr("Date and time spin boxes"));

     QLabel *dateLabel = new QLabel;
     QDateEdit *dateEdit = new QDateEdit(QDate::currentDate());
     dateEdit->setDateRange(QDate(2005, 1, 1), QDate(2010, 12, 31));
     dateLabel->setText(tr("Appointment date (between %0 and %1):")
                        .arg(dateEdit->minimumDate().toString(Qt::ISODate))
                        .arg(dateEdit->maximumDate().toString(Qt::ISODate)));

     QLabel *timeLabel = new QLabel;
     QTimeEdit *timeEdit = new QTimeEdit(QTime::currentTime());
     timeEdit->setTimeRange(QTime(9, 0, 0, 0), QTime(16, 30, 0, 0));
     timeLabel->setText(tr("Appointment time (between %0 and %1):")
                        .arg(timeEdit->minimumTime().toString(Qt::ISODate))
                        .arg(timeEdit->maximumTime().toString(Qt::ISODate)));

     meetingLabel = new QLabel;
     meetingEdit = new QDateTimeEdit(QDateTime::currentDateTime());

     QLabel *formatLabel = new QLabel(tr("Format string for the meeting date "
                                         "and time:"));
     QComboBox *formatComboBox = new QComboBox;
     formatComboBox->addItem("yyyy-MM-dd hh:mm:ss (zzz 'ms')");
     formatComboBox->addItem("hh:mm:ss MM/dd/yyyy");
     formatComboBox->addItem("hh:mm:ss dd/MM/yyyy");
     formatComboBox->addItem("hh:mm:ss");
     formatComboBox->addItem("hh:mm ap");

     connect(formatComboBox, SIGNAL(activated(QString)),
             this, SLOT(setFormatString(QString)));

     setFormatString(formatComboBox->currentText());

     QVBoxLayout *editsLayout = new QVBoxLayout;
     editsLayout->addWidget(dateLabel);
     editsLayout->addWidget(dateEdit);
     editsLayout->addWidget(timeLabel);
     editsLayout->addWidget(timeEdit);
     editsLayout->addWidget(meetingLabel);
     editsLayout->addWidget(meetingEdit);
     editsLayout->addWidget(formatLabel);
     editsLayout->addWidget(formatComboBox);
     editsGroup->setLayout(editsLayout);
 }

 void Window::setFormatString(const QString &formatString)
 {
     meetingEdit->setDisplayFormat(formatString);
     if (meetingEdit->displayedSections() & QDateTimeEdit::DateSections_Mask) {
         meetingEdit->setDateRange(QDate(2004, 11, 1), QDate(2005, 11, 30));
         meetingLabel->setText(tr("Meeting date (between %0 and %1):")
             .arg(meetingEdit->minimumDate().toString(Qt::ISODate))
             .arg(meetingEdit->maximumDate().toString(Qt::ISODate)));
     } else {
         meetingEdit->setTimeRange(QTime(0, 7, 20, 0), QTime(21, 0, 0, 0));
         meetingLabel->setText(tr("Meeting time (between %0 and %1):")
             .arg(meetingEdit->minimumTime().toString(Qt::ISODate))
             .arg(meetingEdit->maximumTime().toString(Qt::ISODate)));
     }
 }

 void Window::createDoubleSpinBoxes()
 {
     doubleSpinBoxesGroup = new QGroupBox(tr("Double precision spinboxes"));

     QLabel *precisionLabel = new QLabel(tr("Number of decimal places "
                                            "to show:"));
     QSpinBox *precisionSpinBox = new QSpinBox;
     precisionSpinBox->setRange(0, 100);
     precisionSpinBox->setValue(2);

     QLabel *doubleLabel = new QLabel(tr("Enter a value between "
         "%1 and %2:").arg(-20).arg(20));
     doubleSpinBox = new QDoubleSpinBox;
     doubleSpinBox->setRange(-20.0, 20.0);
     doubleSpinBox->setSingleStep(1.0);
     doubleSpinBox->setValue(0.0);

     QLabel *scaleLabel = new QLabel(tr("Enter a scale factor between "
         "%1 and %2:").arg(0).arg(1000.0));
     scaleSpinBox = new QDoubleSpinBox;
     scaleSpinBox->setRange(0.0, 1000.0);
     scaleSpinBox->setSingleStep(10.0);
     scaleSpinBox->setSuffix("%");
     scaleSpinBox->setSpecialValueText(tr("No scaling"));
     scaleSpinBox->setValue(100.0);

     QLabel *priceLabel = new QLabel(tr("Enter a price between "
         "%1 and %2:").arg(0).arg(1000));
     priceSpinBox = new QDoubleSpinBox;
     priceSpinBox->setRange(0.0, 1000.0);
     priceSpinBox->setSingleStep(1.0);
     priceSpinBox->setPrefix("$");
     priceSpinBox->setValue(99.99);

     connect(precisionSpinBox, SIGNAL(valueChanged(int)),
             this, SLOT(changePrecision(int)));

     QVBoxLayout *spinBoxLayout = new QVBoxLayout;
     spinBoxLayout->addWidget(precisionLabel);
     spinBoxLayout->addWidget(precisionSpinBox);
     spinBoxLayout->addWidget(doubleLabel);
     spinBoxLayout->addWidget(doubleSpinBox);
     spinBoxLayout->addWidget(scaleLabel);
     spinBoxLayout->addWidget(scaleSpinBox);
     spinBoxLayout->addWidget(priceLabel);
     spinBoxLayout->addWidget(priceSpinBox);
     doubleSpinBoxesGroup->setLayout(spinBoxLayout);
 }

 void Window::changePrecision(int decimals)
 {
     doubleSpinBox->setDecimals(decimals);
     scaleSpinBox->setDecimals(decimals);
     priceSpinBox->setDecimals(decimals);
 }

© 2008-2011 Nokia Corporation and/or its subsidiaries. Nokia, Qt and their respective logos are trademarks of Nokia Corporation in Finland and/or other countries worldwide.

All other trademarks are property of their respective owners. Privacy Policy


Licensees holding valid Qt Commercial licenses may use this document in accordance with the Qt Commercial License Agreement provided with the Software or, alternatively, in accordance with the terms contained in a written agreement between you and Nokia.

Alternatively, this document may be used under the terms of the GNU Free Documentation License version 1.3 as published by the Free Software Foundation.